Archives

Super Chop & Super Chop XL

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
…fully adjustable cycle time

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • Super Chop: 24" Blade, 10HP & 15HP

  • 230V/460V/3PH motors

  • Super Chop XL: 26" Blade, 15HP, 20HP, 25HP 230V/460V/3PH motors

  • Capacity(24"): 1x21,3x20, 4x18.5, 5x16.5, 6x17.5, 7x11, 7.5sq.

  • Capacity(26"): 1x24, 3x22, 5x19.5,7x15,8x12,8-1/2sq.

  • Front blade guard with side hand shields

  • Magnetic Starter with 110V controls

  • Available right-to-left and left-to-right directions

  • Fully Adjustable cut and return speeds

  • Foot pedal operation/ Double palm valve available

  • Built w/off-the-shelf components for your convenience

  • No cast iron or alum. Parts

  • Working Height: 41"

  • Compressed air requirement: 4SCFM @90psi (20cycles/sec.)

  • Special high carbon arbor takes 1" bore blades

  • Infeed & Outfeed Tables & Stops available

Tandem Lifts

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
…keeps long material at a productive work height

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 2HP - 230V/460V/3PH Hydraulic Motor

  • Platform: 30" x 156" up to 48" x 204" (double tandem). Triple tandem - up to 50ft!

  • Capacity: Double tandem - 9000lb, Triple Tandem - 13,500lb (distributed)

  • Base: 30" x 156"

  • 1/2" per second travel speed (up)

  • 9-1/2" down height - 49" up height

  • Foot pedal control is standard

MULTI-BORE by Lauderdale- Hamilton, INC.

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 4 to 16 heads per setup

  • Heavy duty design - up to 5 HP per head

  • Timing belt drive for high horsepower applications

  • Special air cylinder configuration for minimal air usage

  • Simple air operation with hydraulic speed control

  • Wear plates of Ampco. 18 for many years of wear-free use

  • 1" minimum centerline is available as an option - 2-1/4" centerline standard

  • Exclusive table leveling device keeps workpeice level throughout the stroke

  • Built with common off-the-shelf components for your maintenance convenience

  • Many types of chucks available including Jacobs 36B, 1/2" set screw lock and 7/16" RH and LH screw-in

Simple Saw

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 5 or 10 HP motor, 230V/1PH or 220/440V/3PH

  • Foot pedal operation - let up on the pedal, the blade drops and the clamp rises.

  • Front blade guard.

  • 16" or 18" blade capacity.

  • fully adjustable cut and return speeds.

  • Outfeed rail equipped with measuring tape and gravity return stops, as an option.

  • Available in right-to-left or left-to-right feed directions.

VAC-U-FENCE POLY SLITTER

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 14" aluminum wheels with polyurethayne tires

  • PRODUCTION RATE
    3000 to 5000 pieces per day with one operator

  • DESIGN SPECIFICATIONS
    186" Blade Length
    36" Throat Clearance
    20" Vertical Clearance
    12" x 36-1/2" x 36" Vaccum Fence
    3/8" to 3/4" one or two sided blades
    Can be used with wood cutting blades as a 36" bandsaw

  • SIMPLE DESIGN
    Guarded to OSHA specifications
    Easy access door for rapid blade changing
    Heavy, all steel 4" square tubing welded frame
    36" x 60" traveling top, non-tilting

PF96 PANEL FEEDER

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • The PF96 Panel Feeder by LHI unstacks panels for feeding panel saws, routers, laminators, and glue spreaders applications. (shown with optional hydraulic lift)

  • 96IN Travel (specify working height with order)

  • Feeds panels up to 500lbs

  • Feeder arm lifts out of the way for loading.

  • Adjustable rake feeds material from 1/8IN to 4IN thich.

  • 'No scuff' rake design prevents scratching next panel in stack.

  • Adjustable feed rate.

  • Automation packages available allow integration with existing equipment to automatically feed a whole bundle.

Panel-Chop

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • One man operation for lowest labor cost

  • The "Panel Chop" is an economical way to rip and crosscut panels with an automatically controlled push feeder.

  • 12" Diameter saw blade for 1.5" thickness capacity

  • 5 HP, 230/460 volt, 3 phase saw motor.

  • Capacity to stack boards 1.5" high and up to 96IN long panels into narrow strips.

  • Pusher travel of 49" allows ripping of 96IN long panels into narrow strips.

  • Simple touch-screen interface allows operator to program the fence as a pusher or a stop.

  • Variable speed control of the saw feed rate.

  • Excellent dust removal is provided by one 3IN and one 4" dust port.

  • Working height: 42"

  • Footprint: 177" x 156"

  • 7' Roller infeed table included. Solid infeed table also available (shown above)

  • Optional: Pneumatic stop on outfeed table for cuts over 49"

SCISSORS LIFTS

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
2000lb, 4500lb, 6000lb, 8000lb models available

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 1HP - 110V/1PH TEFC Hydraulic motor

  • Foot pedal control, standard

  • 2000lb, 30" x 60" Table Top Size, 1" per second travel (up), 9-1/2" down height - 39" up height

  • 4500lb,6000lb, 30" x 72" table top size, 1/2" per second travel speed (up), 9-1/2" down height - 49" up height

  • OPTIONS AVAILABLE:
    a. 4' x 8' table size
    b. Auto Down Indexing
    c. Wheels - swivel or dolly type*
    d. Flush floor mounting with foot guards

8000lb SCISSORS LIFTS

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 1HP - 110V TEFC Hydraulic Motor

  • Foot Pedal Control

  • 49" x 96" Table Top Size

  • 1/4"/sec Up Travel Speed

  • 14" down height

  • 51" up height

  • 2300# Shipping Weight

  • Options:
    2HP 3HP motor with 1/2"/sec Up Speed
    auto Down Indexing
    Foot Guards for flush floor mounting
    48" x 144" Table Top Size
    60" x 120" Table Top Size

36″ BAND SAW

HIGH PRODUCTION...HEAVY DUTY...AMERICAN PARTS

Simple Design, Low Cost, High Performance
Just like our other equipment

High Production...
...fast

Off-The-Shelf Parts
So you can keep it running years from now

Specifications:

  • 5HP 230V/460V/3PH or 220V/1PH Saw motor

  • 14" Aluminum wheels with polyurethane tires

  • 40" x 72" steel top -non-tilting

  • Guarded to OSHA specifications

  • Easy access door for blade changing

  • 3/8" to 3/4" blade width x 164 1/2" blade length

  • 5000 SFPM blade speed

  • 36" throat - 3 wheel construction

  • 10" clearance from bottom of guide to table

  • Heavy duty bearing type blade guides

  • Optional throat depths up to 52"

  • Optional clearance under guide up to 36"

  • Optional rolling table